Madeira 051SL75W E-ZEE Stick On Light one sided Adhesive Backing 50g for medium and Heavy Elastic/Stretchy Fabrics and Knitwear, as well as Medium Heavy Textiles- White 75cm X 50m
Madeira 051SL75W E-ZEE Stick On Light one sided Adhesive Backing 50g for medium and Heavy Elastic/Stretchy Fabrics and Knitwear, as well as Medium Heavy Textiles- White 75cm X 50m
  • Madeira 051SL75W E-ZEE Stick On Light one sided Adhesive Backing 50g for medium and Heavy Elastic/Stretchy Fabrics and Knitwear, as well as Medium Heavy Textiles- White 75cm X 50m  ، تحميل الصورة في عارض المعرض
  • Madeira 051SL75W E-ZEE Stick On Light one sided Adhesive Backing 50g for medium and Heavy Elastic/Stretchy Fabrics and Knitwear, as well as Medium Heavy Textiles- White 75cm X 50m  ، تحميل الصورة في عارض المعرض

Madeira 051SL75W E-ZEE Stick On Light one sided Adhesive Backing 50g for medium and Heavy Elastic/Stretchy Fabrics and Knitwear, as well as Medium Heavy Textiles- White 75cm X 50m

سعر عادي
{36.000 KD
سعر البيع
{36.000 KD
سعر عادي
بيعت كلها
سعر الوحدة
 

STICK-ON LIGHT

Support for use in areas and fabrics that are impossible to reach or frame
(corduroy, velvet, velour, shirt collars, etc.).

E-Zee Stick-On 1.5 ounce backing is a tear away, adhesive backing with a release paper on one side.
One side is coated with 2 mil of adhesive. Use for hard to hoop or small items such as pockets, socks, cuffs, belts and collars. Use when hoop burns are a concern such as with velour or brushed corduroy. Use for very stretch fabrics like bicycle shorts and swim wear. Also used with Fast Frames.
Specifications:
  • E-Zee Tear® Stick-On 1.5 oz. backing
  • White
  • 2 mil. pressure sensitive adhesive
  • Release paper
  • Medium weight
  • Tear Away stabilizer

For use with:
  • Fast Frames®
  • Hard to hoop items
  • Hoop-less embroidery
How to use:
Cut a piece from a roll or use a piece of pre-cut E-Zee Stick-On to fit your hoop size. Hoop with the release paper facing up. To expose the adhesive, carefully score an X pattern with the tip of a straight pin. Remove the paper inside the hoop area. Position the garment and press on to adhesive where the design is to be embroidered. Embroider the design and remove the embroidered item from the hoop. Tear away the excess backing.

Please Note:
E-Zee Tear® Stick-On should be stored in an airtight container away from heat and humidity.

مثبت، فازلين #